Home > POWER TOOLS & ACC > POWER TOOLS > HOBBY TOOLS/ENGRAVERS > ROTARY HOBBY TOOL ACCESSORIES
Sort By:
1 2 3 ... 6
Dremel 560 Cutting Bit Dremel 8193 Grinding Stone Dremel 932 Grinding Stone
Makes fast clean cuts in drywall for electrical boxes, air vents and other wall features. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust. Specially designed for working with conic surfaces. Do not run in excess of 30,000 RPM.
Dremel 952 Grinding Stone Dremel 402 Mandrel Bosch Accessories 113 Engraving Cutters
A high quality industrial abrasive made for extended general purpose grinding on metals, castings, welded joints, rivets and rust or for working with conical surfaces. Do not run in excess of 30,000 RPM. To be used with all cutting wheels, sanding discs and polishing wheels. Use for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Do not run in excess of 30,000 RPM.
Dremel 429 Felt Polishing Wheel Dremel 432 Drum Sander Band Dremel 422 Felt Polishing Tip
Disc used to polish most metal and plastic surfaces. Using No.421 polishing compound with wheels produces a high luster. Use with No.401 mandrel. Do not run in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM. Polishing point is made to take a semi-rough finish and polish it to a smooth finish on most ferrous metals, stones, glass and ceramics. Used with 401 mandrel. Do not run in excess of 30,000 RPM.
Dremel 83322 Grinding Stone Dremel 430 Drum Sander Band Dremel 408 Drum Sander Band
Industrial abrasive made for sharpening, deburring and general purpose grinding on harder materials including stone, glass, ceramic, porcelain, gemstones and non ferrous metals or for working with conical and flat surfaces. Do not run in excess of 30,000 RPM. Sanding Band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 RPM. Replaceable sanding bands covered with aluminum oxide abrasive used for rough shaping or smoothing of wood and fiberglass. Removes rust from metal surfaces and shapes rubber surfaces. Requires a mandrel with a 1/8" shank. Do not run in excess of 30,000 RPM.
Dremel 480 Collet Dremel 481 Collet Dremel 512E Finishing Abrasive Buff
For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. For rotary tool Nos.245, 250, Series 3 and later; Nos.260, 270, 280, Series 2 and later; Nos.275, 285, 370, 380, 395, 595; Free Wheeler 850; Mini Mite 750; Moto-Flex Tools 232 and 332; Chainsaver Tools 241, 246, 277 and 8504; Flexible Shaft attachments 225 and 90199; Handpiece 235 and 237. For cleaning, light sanding and removing tarnish from brass. Use on metal, glass, wood, aluminum and plastics. For use with the EZ402 EZ lock mandrel (SKU #482.4447) or standard 402 mandrel (SKU #619.9400). Includes 2 fine 320 grit buffs.
Dremel 462 Polishing Point Dremel EZ Lock Finishing Abrasive Buff Set Bosch 431  Oscillating Tool Accessories
Rubber polishing points are impregnated with abrasive and used on on ferrous metals to remove rough areas, small burrs and scratch marks. Point is ideal for cleaning and defining grooves. Compatible with both No.EZ402 EZ lock mandrel and standard No.402 mandrel and all Dremel rotary tools. Refinish furniture, clean grills, remove paint, tarnish and more. Includes 2 buffs, 1 coarse, 180 grit and 1 medium, 280 grit. A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8" shank. For rough shaping and smoothing wood and fiberglass. Ideal for removing rust from metal surfaces. Also ideal for shaping rubber surfaces. 1/4" bit diameter (6.4 mm). Pack of 6.
Dremel 482 Collet Dremel 483 Collet Dremel 997 Grinding Stone
Dremel Collet, Suitable For Use With: All Rotary Tools, Aluminum, Silver, 1/6 in Diameter X 1 in Length Dremel Collet, Suitable For Use With: All Rotary Tools, Aluminum, Silver, 1/32 in Diameter X 1 in Length Dremel Grinding Stone, 1/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel
Dremel 941 Grinding Stone Dremel 85422 Grinding Stone Dremel 108 Short Cylinder Engraving Cutter
Dremel Grinding Stone, 5/8 in Diameter, 1/8 in Arbor/Shank, Aluminum Oxide Abrasive, Gray, For Sharpening, Deburring and General Purpose Grinding on Most Materials Including Stainless Steel Dremel Grinding Stone, 25/32 in Diameter, 1/8 in Arbor/Shank, Silicon Carbide Abrasive, Silver, For Sharpening, Deburring and General Purpose Grinding on Harder Materials Dremel Engraving Cutter, Short Cylinder, 1/32 in Diameter, 9-9/16 in Length, Inverted Cone Shape, 1/8 in Arbor/Shank, Carbon Steel, Gray, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing
Dremel 111 Long Cylinder Engraving Cutter Dremel 401 Mandrel Dremel 411 Sanding Disc
Dremel Engraving Cutter, Long Cylinder, 1/32 in Diameter, 9-9/16 in Length, Cylinder Shape, 1/8 in Arbor/Shank, Carbon Steel, Gray, Applicable Materials: Wood, Fiberglass, Plastic and Soft Metals, 3/32 in Shank Diameter, Single Cut Tooth, For Engraving, Carving and Routing Dremel Mandrel, Suitable For Use With: 414, 422 and 429 Dremel Accessories, 1/2 in Head Size Dremel Sanding Disc, 3/4 in Diameter, 180 Grit, Grade: Coarse, Silicon Carbide Abrasive, Gray, Applicable Materials: Wood, Fiberglass and Metal, Suitable For Use With: Model 402 1/8 in Mandrel, For Rough Shaping and Smoothing Applications
Dremel 412 Sanding Disc Dremel 413 Sanding Disc Dremel Bosch Sanding Band
Dremel Sanding Disc, 3/4 in Diameter, 220 Grit, Grade: Medium, Silicon Carbide Abrasive, Gray, Applicable Materials: Wood, Fiberglass and Metal, Suitable For Use With: Model 402 1/8 in Mandrel, For Rough Shaping and Smoothing Applications Dremel Sanding Disc, 3/4 in Diameter, 240 Grit, Grade: Fine, Emery Abrasive, Gray, Applicable Materials: Wood, Fiberglass and Metal, Suitable For Use With: Model 402 1/8 in Mandrel, For Rough Shaping and Smoothing Applications Dremel Sanding Band, Series: Bosch, Suitable For Use With: Dremel ZW77000 2-Speed Cordless Grinder, Fine 120 Grit, 1/4 in Head Diameter, 1/8 in Shank, Aluminum Oxide, For rough shaping and smoothing Wood and Fiberglass, removing Rust from Metal surfaces and shaping Rubber Surfaces
   
 
1 2 3 ... 6