Home > HAND TOOLS > CLAMPS / FASTENING TOOLS > TORCHES / SOLDERING
Choose a sub category:
TORCH KITS - SOLDER MICRO TORCH KITS TORCH ACCESSORIES - SOLDER
TORCH HEADS SOLDERING & WELDING GASES SOLDER GUNS & IRONS
ELEC SOLDERING GUN ACCESS SOLDER FLUX
MISC SOLDERING SUPPLIES
Sort By:
1 2 3 ... 5
Oatey 30710 Acid Brush Oatey 30011 No. 5 Paste Flux Nokorode 14000 Regular Paste Flux
Use for applying liquid or paste fluxes. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2.
Nokorode Aqua Flux 74044 Paste Flux Oatey No. 95 Tinning Flux Rectroseal C-Flux Soft Soldering Flux
Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder, including 95/5, 60/40, 50/50. and 40/60 solders. Will not run or drip off acid brushes, pipes, and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications. With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out. Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders.
BRSH FLUX 3/PK 3/8IN          Oatey 53017 Lead Free Soldering Paste Flux Oatey No. 95 Tinning Flux
For liquid or paste soldering flux. 6" (152.4mm) long and 1/2" (12.7mm) wide. 3-pack. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. With Oatey silver solder powder added to pre-tin copper pipes. Cleans, fluxes and tins. Lead free, can be used on potable water systems. For clean sweat copper fittings, no pre-cleaning needed. Do not use on electrical parts. Formulated with the same quality as Oatey No.5 flux. Will work for large diameter copper and does not turn copper green. Can never burn out.
Oatey 31410 Cleaning Brush Oatey 30130 Water Soluble Flux Nokorode 14010 Regular Paste Flux
One stainless steel bristled brush for cleaning threads on hard metal pipes and one with brass bristles for use on softer metals. Cleans threaded pipe and fittings, and much more. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. IAPMO listed. All purpose, soft soldering paste flux ideal for use with 95/5 and other common solders such as 60/40, 50/50, and 40/60. Can be used on all solderable metals including copper, tin, zinc, nickel, and sheet lead. Do not use on stainless steel, aluminum, or magnesium. Not recommended for electronic use. When heated, it reduces surface tension and allows the solder to flow easily and uniformly into the joint. Flows smoothly into even the smallest cavity. Cleans and fluxes in one operation. Smooth consistency makes it easy to apply. Lead free and acid free - safe to use on potable water systems. Special oil base protects the solder joint against corrosion. Low scorching and low spattering. Meets: OF 506 Type 1 A, MIL - F - 4995, and MIL - F S - 6872A.6872A.
FLINT RENEWALS                Oatey 30013 No. 5 Paste Flux Nokorode Aqua Flux 74047 Paste Flux
Flint renewals for spark lighter (5) individual flints. Cleans and fluxes at the same time. Blended to clean surface oxidation. 100% lead free. Effective on all metals except aluminum, magnesium, and stainless steel. No pre-cleaning necessary for clean sweat copper fittings, for other applications clean excessive dirt and corrosion. Do not use on electrical parts. Use with solid wire solder. Creamy, smooth paste formulated to meet ASTM B-813 specifications. Water washable, so it can be flushed from the piping system to limit corrosion. Lead-free and may be used with all types of soft solder, including 95/5, 60/40, 50/50. and 40/60 solders. Will not run or drip off acid brushes, pipes, and fittings during application. Superior wetting ability allows solder to flow easily and uniformly into joints. Pre-cleans and resists splattering. Conforms to ASTM B-813 specifications.
Oatey 53026 Wire Solder Oatey 53185 Rosin Core Wire Solder Oatey 53023 Rosin Leaded Core Solder
Lead free alloy of 95 percent Tin and 5 percent Antimony. Most commonly used where frequent and extreme temperature changes and vibrations occur. Meets the requirements of the Safe Water Drinking Act; 450 degrees F ? 464 degrees F melting range. Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines. Alloy of 60 percent Tin and 40 percent Lead; no external flux is needed. 361 degrees F ? 375 degrees F melting range. Can be used for electrical applications including wiring and other fine electronic work. Contains lead. Not for use on drinking water lines.
PASTE FLUX FOR SOLDER 2 OZ    Oatey H-205 Water Soluble Flux Oatey 30106 Soldering Liquid Flux
Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied. Flux for Copper Pipe. As thick as No. 5 flux. Cleans, removes oxidation, makes solder flow smoothly. Works with all solid wire solders. White paste with low odor. For potable plumbing, copper fire sprinkler and hydronic heating systems. Meets ASTM B-813 standard. Made in USA. Cleans and fluxes. Formulated with strong cleaning agent, no need to clean oxidized copper. Ensures fast and effective soldering. Can be used for HVAC applications.
LIGHTER FLINT SPARK           Weller 7250W Standard Soldering Tip Safe-Flo 53061 Wire Solder
Spark lighter with replaceable flints; used to ignite non-self-lighting torches. Made of copper, for Weller soldering guns. Specs: Tip Width O/D .22 in.; Reach/Length 2.57 in. Alloy of tin, silver, copper and bismuth; works with any high grade paste or liquid flux and a standard propane torch. Oatey No.95 tinning flux recommended. Provides excellent flow and fill characteristics with a melting range of 420 to 460 degrees F;  .084" diameter. Used for tin plate work, sheet metal seaming, and hot water heating lines. Meets requirements of Safe Drinking Water Act for use on copper potable water lines.
Oatey H-2095 Water Soluble Tinning Flux Oatey 53012 Rosin Leaded Core Solder Rectroseal C-Flux Soft Soldering Flux
With solder powder added to pre-tin pipes. For potable plumbing, copper fire sprinkler and hydronic heating systems. Safe, lead free, water flushable. Resists burning, will not separate in extreme heat. Stays soft in cold weather. Excellent draw capabilities, as thick as No.5 flux. Meets ASTM B-813, IAPMO Listed. 40 percent tin and 60 percent lead alloy with non-corrosive and non-conductive core flux for electrical and electronic soldering such as appliance repair, radio, TV, wiring motors and non-drinking water lines; melting range of 361 to 460 degrees F. Lead free, high quality flux containing powdered solder which provides added insurance for a leak free joint. For use with 95/5, 60/40, 50/50, and 40/60 solders.
Nokorode 14020 Regular Paste Flux LIQUID FLUX FOR SOLDER 2 OZ   Oatey 53010 Wire Solder
Will not freeze or decompose. No odor. Lead free. Recommended for use on all solder alloys including 95/5 and all lead free solders. Meets Specification O-F-506, Type 1A and A-A-51145, MIL-F-4995-2. Plumbers, workers in brass, copper, tin, steel and stained glass will achieve superior results. Produce strong, neat and durable joints. Ruby Fluid allows solder to flow in a thin film. Adheres quickly and stays where it is applied. 50 percent tin and 50 percent lead, used with an external flux. Good flow characteristics and low melting point. 361 to 421 degrees Fahrenheit melting range; 0.075" diameter. Used for soldering galvanized gutters, general repairs, radiators, sheet metal and non-drinking water lines. Not to be used for plumbing applications.
   
 
1 2 3 ... 5